Miss Aubree DenesikAIYIMA T8 6N3 DMr. Helmer WiegandJamarcus VonRueden MDigital Tube PreamplMrs. Marie Baileyifier BluProf. Sonia Renner IIIetoothRudolph SimonisDemetrius McGlynn Jr. 5.0 Hi-FMs. Janie Hammesi Headphone VacuuRoscoe ReillyFleta Ortizm Tube PreDr. Candelario Macejkovic Vamp for Home Ms. Lonie Hintz IVMr. Savion Johnston IIWireless ReceivMiss Colleen Kuhlman IIIer Audio Kiel BlickDecoder PBrianne Koss Jr.reamp Mr. Arch Nicolas MDPC-USB DAAlexandro McDermottDr. Laury BauchC APTX + with ReProf. Bernard Hartmann DVMKrystal Deckowmote CoProf. Elva Wyman IIIntrol

Product Description

From the brand

ABOUT US

Thank you for choosing our official flagship store of AIYIMA, AIYIMA is a manufacturer brand of high-quality audio equipment!

Adopt classical tube 6N3 design

T8 is a tube headphone Preamp, which uses MAX9722 headphone amp chip, and 6N3 tubes can get warm and smoother sound,

tubes can be replaced with GE5657,396A,2c51,12BA4,5670,6H3n etc,.

You can change the tube according to your needs to achieve different sound quality effects

Multi-function switch knob

Rotate the red knob to adjust the volume according to your preferences;

Press the knob to control the machine switch ON or OFF;when the headset and RCA output are connected at the same time,you can double click the button to switch to the sate of simultaneout output of the headset and RCA(Headset output Priority)

Exquisite and unique design

The visual OLED digital display is more intuitive and clear, and the operation is more simple and convenient;

T8 is custom-made, unique, exquisite, and desktop, It is designed for everyone who loves HiFi, audiophiles and beginners.

6N3 Digital Tube Preamplifier

Tube Headphone Amp Preamp

PC-USB supports sampling rate: 192KHz

Distortion: RCA: 0.2%/HP: 0.003%

SNR: RCA,108dB; HP, 106dB

Working voltage: DC12V

Maximum output power: RCA: 1.9V/HP: 120mW@32

Input sensitivity: 2V

Net weight: 0.87kg

Frequency response: 20Hz-20kHz (0.5dB)

Product Size: 123*50*139mm/4.84*1.97*5.47"(L*W*H)

Features

FQA

Q: All my wires are connected. Why is there no sound?

A: 1. Check whether the machine is turned on and whether it has switched to the corresponding input channel.

2. Check whether the back-end connection is correct and whether the volume is in the minimum state.

3. If all the above are normal, check whether the input playback device is silent, paused, or the volume is at its minimum.

Q: Why can't I search for bluetooth pairing names?

A: Due to the design of this machine, bluetooth does not work when using other channels for input. You just need to switch the input to Bluetooth mode.

Q: Why does the sound break

A: Although this product is the front stage of DAC, it also has the function of amplification. If the volume of the rear stage device is turned up to the maximum, the volume of the front stage is also turned up to the maximum, which is easy to distort. At this time, you just need to turn down the volume of the front stage or the rear stage.

Q: Why is there a lot of electrical noise from the horn?

A: If you are not using the original standard power supply, please replace the power supply and test again.Many power supply ripple interference factor is large will cause a lot of current sound.

Q: Why does the speaker make a loud buzzing sound when I plug in the input cord and don't play the audio source?

A: when the signal line without shield is used, the interference signal will enter the power amplifier for amplification. Replacing the signal line with shield can effectively solve the interference sound, or unplug the signal line.

More technical support,pls ask me:/hz/help/contact/A3BG62S1F23IH5# .Or leave any of your instant messaging account and I'll contact you.thanks!

Product Images

Product Information