Dr. Lawrence Schiller MDSoundpeats Life BlDelaney Ebertuetooth VProf. Aurelie Heller MDDusty Kirlin5.2 AJarod Veumctive Noise CanKatarina LittelGreen Robel Jr.celling Touch CMr. Tristian PagacAnnalise Ritchieontrol Wireless Trisha PowlowskiEarbuMiss Twila Vandervortds EaProf. Alberta Buckridgerphones 25Ms. Cindy Jacobs DDSH PlayNova NienowMr. Shayne Howell PhDtime

**Specification:

Bluetooth Version:V5.2
Supported Bluetooth Profiles: A2DP/AVCTP/AVDTP/AVRCP/HFP/HID
Charging interface: Type-C
Control method: Touch
Charge Time: Earphone:1.5H; Charging case:2H

Total Music Play Time 60% volume:Earphone-5h/The number of times to charge the headset when the charging box is fully charged: 4 times

Charging Input:5V/1A
Water resistance:IPX5

Total Standby Time: 30H

**How to use it?

Reset way: Open the charging box, press and hold the button of the charging box for 10S, the white light of the charging box flashes 2 times, the reset is completed

Enter: need to use a specific production test board to enter DUT mode Exit: put in the charging box to exit

Connection and pairing:

1. Open the charging box, turn on the headset and enter the state of inter-matching, connecting and searching, which lasts for 3 minutes. At this time, the headset can not only connect to the last mobile phone, but also can be searched.
2. In fact, it will be paired with the right earphone within 1S and enter the slave state
3. Open the cover of the charging box, press and hold the button of the charging box for 3S, the headset enters the pairing mode

Auto-turn off function if it is disconnected?---3min

**Basic Function
1. Master-slave switching, left and right ears can be used alone
2. Listening to songs: switch songs (lower right, no previous song switching function), pause playback,
3. Call: answer and hang up, call switch, reject call
4. Voice assistant (three clicks on the right ear)
5. ANC noise reduction, transparency mode

**Indicating light when in use

R, L are paired with each other/paired with the mobile phone: the main ear flashes red and white alternately, and the slave ear is always on in white

The headset is connected to the mobile phone in standby mode: both ears are always on with white lights

Listening status: no lights

When charging the charging box, the indicator light shows:

Headphone charging: charge after the charging box is closed, the red light is always on during charging, and goes out when fully charged
Charging the charging case: the indicator light breathes slowly
20% off the red light and breathe slowly
20%-69% yellow light slow breathing
70&-99% green light slow breathing
100% green light is always on

Charging box power display:

Headphones: iOS/android (supported devices), the red light flashes every 5S when battery Low indicates low power.
Charging box: The headset indicator lights up and displays the current battery status of the charging box for 10S:
100%—50% display green
49%-10% show yellow
Less than 10% is displayed in red

Package Contents:

1. Headphone*1 pair, charging box*1
2. Charging cable*1
3. Ear caps*3 pairs (S/M/L)
4. Manual*1